12-29-2016 10:21 PM
when i try to set time via time zone and put gmt +05 but it showing wrong time
showing with RTC...
19:22:27, GMT+05, Fri Dec 30 2016
it is howing 8 hour a head.
can any one help wht is wrong in this
01-02-2017 01:09 AM
Please refer to the ADX defect-id down below.
I suspect the S/W issue, and this defect-id fixed in 12.4.00b.
As I think this issue occurs due to OS Bug. So, I update my opinion above all.
We need to get confirmation from BRCD TAC team that is issue is OS Bug or not.
"show clock" output on ServerIron ADX does not display the source of the time.
"show clock" output on ServerIron ADX does not display the source of the time. It does not display either "showing with RTC" or "showing with SNTP".
Reported In Release:
Service Request ID:
01-09-2017 11:46 AM
HI Chul Ki Kown,
i have below version, can you tell on which version it is fixed?
Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
Boot Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
Monitor Version 12.5.00T405 Aug 14 2012 11:09:42 PDT label: dob12500
System Version 12.5.02kT403 Oct 5 2016 21:06:59 PDT label: ASR12502k
AXP Version: 2.01 Dated: 2013/02/28 15:13:07
PAX Version: 8.7 Dated: 2012/02/28 17:04:52
MBRIDGE Version: 000b, Device ID # bebe
SSL XAP1 Version: 0.00 Dated: 2009/08/31 17:20:55
Backplane: ServerIron ADX 4000, Serial #: M00505M1AS
Chassis: ServerIron ADX 4000, Serial #: D72514M007
LID #: fMHKGJoFFM License: SI-4000-PREM
SL slot-lc1: Line Card 12x1G Fiber
Serial #: E80341L007
Part #: 60-1001763-03
Version #: 13b626-05050505
SL slot-mp: ServerIron Management Mod, ACTIVE
Serial #: E40313J00M
Part #: 60-1001841-03
SSL Card1 - Serial#: 1G0319J00D Part #: 40-1000374-02
SL slot-sf: ServerIron Switch Fabric Mod
Serial #: E60304M00D
Part #: 60-1001650-02
Version #: 111d8037-00-111d802d-0d-11b720
SL slot-asm1: ServerIron 8BP App Switch Mod
Serial #: E50344K011
Part #: 60-1001649-03
ASM-LID #: gKFIJJmFGG
Version #: 111d8037-00
Application Processors: 8
Active management module:
1499 MHz Power PC processor (SVR 2.2, PVR 8021/0030) 599 MHz bus
512 KB Boot flash
131072 KB Code flash
4096 MB DRAM
The system uptime is 20 days 6 hours 7 minutes 56 seconds
The system started at 01:50:42, GMT+05, Wed Dec 21 2016
The system - boot source: secondary, mode: warm start, soft reset, total resets:17
01-12-2017 09:00 PM
It is first found in the 12.4.00 main train os code, and OS bug fixed in 12.4.01b.
And, you are using the main train OS code 12.5.00...
So, I'm not sure about this OS bug fixed in 12.5.00 main train code...
So, We need to get confirmation from BRCD TAC team that is issue is OS bug or not.
If yes, We get OS bug from TAC team and ask to fix this OS bug at 12.5.00 main train...