Ethernet Fabric (VDX, CNA)

Reply
New Contributor
Posts: 4
Registered: ‎05-11-2015

VLAN and Gateway Using VDX6740

We currently have a SX800 where we have 2 vlans (VLAN2 and 101) each has an IP address assigned to the VLANs. We use the IP address as a default gateway and the SX does the ourting between the VLANs for us.

 

Can I do the same on our VDX6740? I assume I just assign an IP address to each of the VLANs and it will automatically route between the 2 VLANs?

 

Thanks

Highlighted
Brocade Moderator
Posts: 58
Registered: ‎02-04-2015

Re: VLAN and Gateway Using VDX6740

Hello,

 

The same applies to the VDX, yes.

 

Regards,

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.