07-12-2017 07:07 AM
we are using SNMP to get temperture Values into our Icinga/nagvis. If i do a "show chassis" on my ICX 7250 i get two Sensors:
Sensor 1 = MGMT Thermal Plane = CahassiTemperature and Sensor 2= POE MGMT PLANE
I loaded the MIB for the Switch and with OID: .22.214.171.124.4.1.19126.96.36.199.1.18.0 = snChasActualTemperature.0 and OID .188.8.131.52.4.1.19184.108.40.206.220.127.116.11.1 = snChasUnitActualTemperature.1 i get the Values for the MGMT Thermal Plane.
in one or two Switches we have issues with the POE Temperature but the OID for this Sensoe can't be found. I looked through the MIB
can any one tell me the OID's or if there aren't any=?
Solved! Go to Solution.
07-12-2017 02:28 PM
Looking into the IP MIB reference, there are only two OIDs that can be polled regarding temperature for stacking switches; 1 for Sensor Description and the other for Temp Value. As shown below
Description of the temperature sensor.
Read-only Temperature of the sensor represented by this row. Each unit is 0.5º
Valid values: 110º - 250º Celsius.
These seem to be only polling Sensor 1 in the "Show Chassis" Command. It Doesn't seem that Sensor 2 can be polled via SNMP.
Hope this helps addressing your concern.