Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 8
Registered: ‎02-26-2017

MPLS on MLX up/down for no reason.

Hello,
 
We have several MLXs that we use to make MPLS for our clients however we have in the logs losses for some MPLS links.
 
The type of message I have is this one:
 
MPLS: VLL [name_of_port] Peer [router_id] Waiting for VC Withdraw (VC ID 872) is down.

So we have these alerts but our customers do not notice any packet loss nor slowdown yet we in the MLXs logs a lot of MPLS link up / down.
 
We are in version 5.8 and I can not find explanations regarding this problem.
 
Has anyone among you ever encountered this problem?
 
Best Regards,

Highlighted
Brocade Moderator
Posts: 84
Registered: ‎02-04-2015

Re: MPLS on MLX up/down for no reason.

Hi Mathieu,

 

There isn't a known issue with code 5.8 on MLX that could cause this behavior. There is Defect 578904 but it is specific to CER/CES platforms

 

If this is a reoccurring issue, you may want to check if the flapping happens at certain times or Randomly. You may also want to check interface errors and CPU utilization during the flaps.

 

With this Data you could get to the bottom of the issue, or raise a case with Brocade TAC to assist you further.

 

Another option is to try and increase LDP Hold timeout vlaue and see if it alleviate the issue.

 

Regards,

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.