06-05-2017 01:09 PM
I'm running experiments to see the delay for rule installation on SDN Broacade ICX 6610-24 swicth.
I installed rules for two computers to ping using the opendaylight interface and the computers were able to ping correctly.
However when I run :"clear openflow all"
The rules are not removed and it still keeps pinging.
Does anyone know why the flows don't get removed from the hardware and what should I do to remove them?
Thanks a lot
06-16-2017 10:26 AM
Welcome to the Community!
While we still encourage the Community to assist with your post, I wanted to let you know that I have passed your questions on to our TAC Engagement Team. They will be reaching out to you shortly to gather more information regarding your configuration, so we can get you routed to the correct group.
Once your case is closed, if appropriate, we will post the resolution to this thread to help others within the Community; or, if you'd prefer, please come back and post the resolution yourself.
Please let us know if there is anything else we can do to help faciliate your case resolution.
You can find out more about the TAC Engaged Program by clicking on the link below.
Brocade Community Team
06-16-2017 12:04 PM
I also wonder if there is any command that I could send to the Brocade switch to monitor the rule installation delay.
I can use "show openflow flows" to see wheather a specific rule is installed or not? but it does not give me any time statistics. For example, how long it takes to install 250-1024 rules in the flow table?