Fibre Channel (SAN)

Reply
New Member
Posts: 1
Registered: ‎04-11-2017

SAN switch local user access denied

hi All.

 

i set AAA services in GUI to use Primary Authentcation as LDAP, but i did not set the secondary as Local.

 

Now as my ldap authentication is having issue authenticating, i tried loggin in using local admin but  am getting the user denied error thru putty. GUI error is invalid username /password

 

 i can serial in using admin account and have run the command: aaaconfig --authspec "local" but still error

 

Please help.

 

Thanks

 

Highlighted
Brocade Moderator
Posts: 216
Registered: ‎03-29-2011

Re: SAN switch local user access denied

Hi,

 

you logged in via the serial console and change the aaa configuration with

 

aaaconfig --authspec "local"

 

but you still have issues logging via IP address after running the above. Is my understanding correct? 

And what is your FOS vesion? Can you please provide the output from "aaaconfig --show"

 

I would suggest the following configuration with testing

 

aaaconfig --authspec "ldap;local" -backup

 

to allow the local database to work as backup.

 




If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution".

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.