Management Software

Reply
Occasional Contributor
Posts: 10
Registered: ‎10-28-2016

How to schedule reload of multiple switches in BNA?

I am trying to deploy CLI to "reload" and it passes the verify but fails the actual deploy...

 

Deploying
Deploying CliConfigDevicePayload...
Error in deploying CliConfigDevicePayload
Finished
CLI command failed : Invalid input -> reload at 09:29:00 11-28-16
Type ? for a list, for command: reload at 09:29:00 11-28-16

 

 

I've also tried "reload" with no other input.  Same results. 

 

What am I missing?

 

Thanks.

Brocade Moderator
Posts: 84
Registered: ‎02-04-2015

Re: How to schedule reload of multiple switches in BNA?

[ Edited ]

Hello,

 

Since The Management application automatically assumes the commands you enter are under the configuration level, you need to start your template with "exit" to go back to privilege mode so you can execute the reload command.

 

The template will look like

 

write memory (optional)

exit

reload at 09:29:00 11-28-16

 

Hope this helps addressing your issue

 

Thanks

Os

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.